A Lambert Glacier - Amery Ice Shelf series of airborne (Squirrel helicopter and Twin Otter fixed wing) RES and surface elevation profiles were conducted over two summer seasons; 1988/89 and 1989/90. Altogether nearly 10,000 km of various flight paths were undertaken, operating out of Mawson (67.60 S, 62.88 E), Davis (68.58 S, 77.97 E), Dovers (70.22 S, 65.87 E) or Beaver Lake (70.80 S, 68.18 E). More information can be found at the BEDMAP website. The fields in this dataset are: mission_id (unique mission identifier) latitude (decimal degrees) longitude (decimal degrees) ice_thickness (m) surface_elevation (m) water_column_thickness (m) bed_elevation (m)

Metadata record for data from ASAC Project 291 See the link below for public details on this project. From the abstracts of the referenced papers: Ground surveys of the ice sheet in Wilkes Land, Antarctica, have been made on oversnow traverses operating out of Casey. Data collected include surface elevation, accumulation rate, snow temperature, and physical surveys, the data are mostly restricted to line profiles. In some regions, aerial surveys of surface topology have been made over a grid network. Satellite imagery and remote sensing are two means of extrapolating the results from measurements along lines to an areal presentation. They are also the only source of data over large areas of the continent. Landsat images in the visible and near infra-red wavelengths clearly depict many of the large- and small-scale features of the surface. The intensity of the reflected radiation varies with the aspect and magnitude of the surface slope to reveal the surface topography. The multi-channel nature of the Landsat data are exploited to distinguish between different surface types through their different spectral signatures, e.g. bare ice, glaze, snow, etc. Additional information on surface type can be gained at a coarser scale from other satellite-borne sensors such as the ESMR, SMMR, etc. Textural enhancement of the Landsat images reveals the surface micro-relief. Features in the enhanced images are compared to ground-truth data from the traverse surveys to produce a classification of the surface types across the images and to determine the magnitude of the surface topography and micro-relief observed. The images can then be used to monitor changes over time. Landsat imagery of the Antarctic ice sheet and glaciers exhibit features that move with the ice and others that are fixed in space. Two images covering the same area but acquired at different times are compared to obtain the displacement of features. Where the time lapse is large, the displacement of obvious features can be scaled from photographic prints. When the two images are co-registered finer features and displacements can be resolved to give greater detail. Remote sensing techniques can be used to investigate the dynamics and surface characteristics of the Antarctic ice sheet and its outlet glaciers. This paper describes a methodology developed to map glacial movement velocities from LANDSAT MSS data, together with an assessment of the accuracy achieved. The velocities are derived by using digital image processing to register two temporally separated LANDSAT images of the Denman glacier and Shackleton Ice Shelf region. A derived image map is compared with existing maps of the region to substantiate the measured velocities. The velocity estimates from this study were found to correspond closely with ground-based measurements in the study area.

AM01b borehole site, drilled at a height of 65 metres above sea level. Small amount of static GPS data at each of four sites in a 500 m x 500 m square strain grid. Consult Readme file for detail of data files and formats.

AM01 borehole drilled January 2002 at a height of 65 metres above sea level. GPS data collected in two segments: over 3 days 'static' around 07-Jan-2002, and a short kinematic sequence on 23-Jan-2002. Consult Readme file for detail of data files and formats.

Amery Ice Shelf AM04 borehole drilled mid-January 2006. Sub-shelf water profiling measurements conducted over a period of a few days. Partial video recording of borehole walls and sea floor benthos. Collection of targeted ice core samples. Sediment sample collected from sea floor. Long term monitoring instruments installed (thermistors in ice, 3 x CTD in ocean cavity). This is a parent record - see the child records for further information. This device stopped working by the 2011/2012 season, and all sensors were declared non-functional.

Amery Ice Shelf AM03 borehole drilled mid-December 2005. Sub-shelf water profiling measurements conducted over a period of a few days. Partial video recording of borehole walls and sea floor benthos. Sediment sample collected from sea floor. Long term monitoring instruments installed (thermistors in ice, 3 x CTD in ocean cavity). This is a parent record - see the child records for further information.

Ice shelf surface elevation data from an oversnow ground-based traverse along the centre of the Amery Ice Shelf from A509 (69.06 S, 72.15 E) to T4 (71.22 S, 69.48 E), including two transverse arms; between G1 (69.49 S, 71.72 E) and A119 (69.81 S, 73.28 E); and between T3 (70.79 S, 68.89 E) and T2 (71.00 S, 70.75 E) during the 1968 spring-summer season. More information can be found at the BEDMAP website. The fields in this dataset are: Mission ID Latitude Longitude Ice Thickness Surface Elevation Water Column Thickness Bed Elevation

The data sets consist of static GPS data collected on the Amery Ice Shelf using Leica CRS1000 receivers. Additional data at Landing Bluff, Dalton Corner and Beaver Lake were collected by ANU (see ASAC project 1112). All data are provided in UNIX Z compressed RINEX (Receiver INdependent EXchange) format, as described in the IGS standards - see http://www.igs.org/products The standard RINEX file naming convention is used, i.e., an eight digit file name as bbbbddds.yyt, where bbbb refers to a four digit station name, ddd refers to the day number of the year, s refers to a session number and yyt is the file extension number where yy refers to the year and t defines the file type (o for observation file and n for navigation file). All files are compressed using the UNIX Z compression scheme, as shown by the extension .Z. For example, base0010.00o.Z and base0010.00n.Z. The files are set out in the following directories on the ftp site: season1999_2000 \amery \land \raw Data are also available for download from the Australian Antarctic Data Centre at the provided URL. Raw data, where available, is stored in the aw directory in standard Leica LB2 Binary format. Conversion routines are available: http://www.unavco.org/software/software.html GPS data collected at the permanent stations at Casey, Davis and Mawson are available from Geoscience Australia (previously AUSLIG) - see http://www.ga.gov.au/geodesy/antarc/antgps.jsp The fields in this dataset are: GPS marker number marker name observer/agency approximate position antenna wavelength interval

Metadata record for data from ASAC Project 1263 See the link below for public details on this project. ---- Public Summary from Project ---- The project will involve making a series of measurements of the ice-sheet topography using GPS static and kinematic procedures so that they can be used to calibrate/validate measurements made from the new generation of satellite geoscience laser altimeter systems (GLAS). The measurements of the ice sheet topography will be made near-simultaneously (within 8-16 days) from both GPS and laser systems (and possibly also from an aircraft laser altimeter) and used to assess the error budgets of the GLAS satellite. The overall goal of the project is to determine the seasonal and interannual variation in surface elevation of the Antarctic ice sheet. This information is essential for predicting future changes in ice volume and sea-level. See the documentation provided in the dataset for more information.

The data sets consist of static and kinematic GPS data collected on the mery Ice Shelf using Leica 399 receivers. Additional GPS data were collected at Beaver Lake, Hamm Peak, Moushino Is., New Year Nunataks, Jetty Peninsula, and Else Platform. Most data are provided in UNIX Z compressed RINEX (Receiver INdependent EXchange) format, as described in the IGS standards - see http://www.igs.org/products Some data are compressed using the RINEX Hatanaka compression scheme. The standard RINEX file naming convention is used, i.e., an eight digit file name as bbbbddds.yyt, where bbbb refers to a four digit station name, ddd refers to the day number of the year, s refers to a session number and yyt is the file extension number where yy refers to the year and t defines the file type (o for observation file and n for navigation file. d indicates an observation file compressed using the Hatanaka compression scheme). All files are compressed using the UNIX Z compression scheme, as shown by the extension .Z. For example, base0010.98o.Z, base0010.98n.Z, base0010.98d.Z. The files are set out in the following directories on the submitted CD: season1998_1999 \amery \amery\camp \beaver GPS data collected at the permanent stations at Casey, Davis and Mawson are available from Geoscience Australia - see http://www.ga.gov.au/geodesy/antarc/antgps.jsp The fields in this dataset are: marker number marker name observer/agency approx position antenna wavelength GPS Amery ice shelf