DRIFTING BUOYS
Type of resources
Topics
Keywords
Contact for the resource
Provided by
-
This dataset contains ice motion observations made under the Australian Antarctic Program, projects 4593 and 4506. Data was obtained using two open-source ice motion loggers, hereafter ice buoys. Two ice buoys were deployed on landfast ice just north of the Swain Group, Antarctica (66.2 degr. S, 110.6 degr. E), on 13 October 2020. Instruments were retrieved on 10 November 2020. The ice buoys measure motion in 9-degrees-of-freedom at 10Hz using a VectorNAV VN-100 IMU, with an accuracy of O(mm) for short waves and O(cm) for long waves. Both instruments also record their geographical location through GPS. Full time series of their motion is processed on board and summaries are send through Iridium. Wave spectra and GPS coordinates were transmitted roughly every 4 hours. The dataset comprises the raw data measured by the two ice buoys, we have referred to them as AAD_17 and AAD_18 for administrative reasons. Data output for each buoy is: A = vertical acceleration (mean subtracted) (m/s^2); P = pitch (degrees); R = roll motion (degrees); z = surface elevation (m); t = UTC time (Matlab ‘datenum’ format, i.e., days since year 0000); lat = latitude; lon = longitude. The geographical coordinates ‘lat’ and ‘lon’ are in degrees.
-
These data were collected by 8 EM-APEX profiling floats, which are a sophisticated version of the standard Argo float. They measure temperature, salinity and pressure, as for standard Argo. They also use electromagnetic techniques to measure horizontal velocity. The floats were deployed across the northern Kerguelen Platueau in November 2008, and drifted eastward with the Antarctic Circumpolar Current as they profiled between the surface and 1600 dbar. They transmitted data through the Iridium satellite system and continued to profile eastward until their batteries failed. The range of latitudes covered is approx. 40S-50S, and longitudes 65E-90E. Although most of the data is in the longitude band 65E-78E. The temporal range of the data is Nov 2008 to approx. Sep 2009. The file "emapex_final.mat" contains the quality-controlled and calibrated data from 8 EM-APEX profiling floats deployed across the northern Kerguelen Plateau during the Southern Ocean Finestructure (SOFine) experiment aboard the U.K. RRS James Cook, Cruise 29, 1st Nov-22nd Dec 2008, Cape Town to Cape Town. Funding for the EM-APEX component of the experiment was from the Australian Research Council Discovery Project DP0877098 (N. Bindoff, H. Phillips and S. Rintoul). The Australian Antarctic Division provided subantarctic clothing for Bindoff and Phillips under AAS project #3002 (H. Phillips and N. Bindoff). AAS project #3228 (N. Bindoff and H. Phillips) provided $27,000 for salary support for a research assistant to work on analysis of the data and publication of a manuscript. Significant in-kind support was provided by CSIRO Marine and Atmospheric Research for the EM-APEX component. Details of the shipboard operations and deployment of the EM-APEX floats can be found in the document "emapex_deployment_report.pdf". The complete voyage report is available from h.e.phillips@utas.edu.au. It may be cited as Naveira Garabato, A.; Bindoff, N.; Phillips, H.; Polzin, K.; Sloyan, B.; Stevens, D. and Waterman, S. RRS James Cook Cruise 29, 01 Nov - 22 Dec 2008. SOFine Cruise Report: Southern Ocean Finestructure National Oceanography Centre, Southampton, 2009 See the download file for more information, which contains a data report and a data description file as well as the data.
-
Two Waves In Ice Observation Systems (Kohout, Alison L., Bill Penrose, Scott Penrose, and Michael J M Williams. 2015. “A Device for Measuring Wave-Induced Motion of Ice Floes in the Antarctic Marginal Ice Zone.” Annals of Glaciology 56 (69): 415–24. doi:10.3189/2015AoG69A600) were deployed about 1.5 km apart on ice floes close to latitude 62.8 S and longitude 29.8 E on 4th July 2017 (NYU1 and NYU2). The region where the instruments were deployed (Antarctic Marginal Ice Zone) consisted of first-year ice on average 40 – 60 cm thick. The instruments were deployed by hand by three people, lowered by crane from the ship to the ice on a basket cradle. NYU 1 was deployed on a rectangular ice floe of length 8 m and width 3 m, with a thickness of about 40 – 50 cm. NYU 2 was deployed on a triangular ice floe of length 4 m and thickness 40 cm. The temporal resolution is variability (every 15 minutes to 2 hourly). The survival of the sensors depended on staying fixed to the floe and the battery life. On 12th July, the sampling rate of NYU 2 was reduced from 15 minutes to 2 hourly to extend the battery life. On 13th July, NYU 1 overheated and the battery dropped below the operating voltage. NYU 2 continued to send back data for another six days, but then stopped sending data for an unknown reason on 19th July. Records can support 1. the assessment of metocean conditions in the Southern Oceans; and 2. calibration and validation of wave and global circulation models.
-
This dataset contains ice motion observations made under the Australian Antarctic Program, Projects 4593 and 4506. Data was obtained using two Spotter wave buoys (Sofar Ocean Technologies), hereafter wave buoys, and two open-source ice motion loggers, hereafter ice buoys. Instruments were deployed on (land)fast ice on the eastern rim of the Amery Ice Shelf, Antarctica (69.2 degr. S, 76.3 degr. E), on 7 December 2019. After the break-up of the ice occurring at the start of January 2020, instrumentation started to drift with the ice. Last transmission recorded was on 10 March 2020. The wave buoys measure their 3-axis motion at 2.5 Hz through GPS and have an accuracy of approximately 2 cm for the recorded significant wave height. The ice buoys measure motion in 9-degrees-of-freedom at 10Hz using a VectorNAV VN-100 IMU, with an accuracy of O(mm) for short waves and O(cm) for long waves. Both instruments also record their geographical location through GPS. Full time series of their motion is processed on board and summaries are send through Iridium. For the ice buoy wave spectra were transmitted roughly every 3 hours. The transmission interval for the wave boys was variable, ranging from every half an hour to every 3 hours. Data transmitted by the wave buoys was either integral wave properties or the complete wave spectrum. In the dataset, WB and IB are abbreviations for wave buoy and ice buoy, respectively. This dataset includes all observations transmitted during the measurement campaign (WB1, WB2, IB1, IB2). E = wave energy spectrum (m2/s); f = wave frequency (Hz); a1, a2, b1, b2 = Fourier coefficients; Hs = significant wave height (m); Tp = peak period (s); Tm01 = mean period (s); Dir_peak/mean = peak and mean wave direction and 'spr' refers to spreading; volt = battery voltage (V). Time is in UTC, and in Matlab’s datenum format (i.e. the number of days since year 0000). The geographical coordinates ‘lat’ and ‘lon’ (latitude and longitude, respectively) are in degrees. Note, as the ice buoys transmit the GPS coordinates and wave data in separate data messages, for the ice buoys ‘time’ refers to the reference time of the wave properties Hs and Tp, whereas ‘GPStime’ refers to the reference time of the geographical coordinates (lat and lon). For the wave buoy, all data is transmitted at the same time.
-
In situ Lagrangian drifter positions were collected from nine expendable sea-ice buoys. Positions were collected by GPS receivers aboard each buoy and relayed via the CLS Argos satellite data system. The scientific proposal for this project was based on the deployment of two meso-scale buoy arrays over the continental shelf break in the SIPEX 2012 experimental region. Resolving of ice motion over the continental shelf and the shelf break is expected to provide crucial information on sea-ice deformation and ice strength. However, due to the unfavourable cruise track and also due to operational issues with helicopter support, it was not possible to deploy any of the meso-scale buoy arrays. Instead buoys were deployed to resolve ice deformation within the wider SIPEX 2012 region. Position data are available hourly from most buoys. CLS Argos transmitted data suffer from a data transmission blackspot just prior to local none, when there will be no data available. Data processing will be carried out as described in Heil et al. [2008] The dataset is build from ASCII files for each buoy with time stamps and observed latitude and longitude. The format (by column [C] for each file is as following: C1: Program ID C2: Buoy ID C3: Year C4: Month C5: Day C6: Hour C7: Minute C8: Second C9: Day-of-year C10: Lat (degN) C11: Lon (degE)
-
General datasets collected on the KACTAS voyage of the Aurora Australis, 2000-2001 season (voyage 6)
These are "found" datasets of general data collection from the KACTAS voyage of the Aurora Australis in the 2000-2001 season. The datasets were compiled by Toby Jarvis as part of his hydroacoustic work, but are not hydroacoustic in nature. The data include voyage reports, relevant GIS data, at sea observations, some drifting buoy data, satellite data, trawls data, underway data, etc. These datasets should be treated with caution, as the quality of the datasets is unknown. The KACTAS voyage was a marine science voyage that visited Mawson, Casey and Davis prior to returning to Hobart.
-
Metadata record for data from ASAC Project 2519 See the link below for public details on this project. This dataset comprises of floating buoy data collected as part of the ARGO program. All of the data are automatically uploaded to the main ARGO data centre, and can be accessed from there (via the provided URL). Above the map of current float locations on this web page, there are buttons to allow you to access an interactive map, search for floats, and access the data. The Argo floats are programmed to measure temperature and salinity profiles from 2000m to the sea surface every 10 days. When they surface they transmit the profile data, their location, and various engineering parameters to satellite. The data ares put on the Global Telecommunications System (GTS) and are available within 24 hours. Global data centres in the USA and France receive the raw data from the country of origin and also update the data when quality control is performed. Some floats measure other data in addition to temperature and salinity. Dissolved oxygen and current velocity are two other parameters that are measured by a few floats. See the ARGO website for further details about each float (information can be accessed using the WMO (World Meteorological Organisation) numbers provided in the download file). The fields in this dataset are: Launch Date Latitude Longitude ARGO Number WMO Number Webb Number Deployment Order Number More information about the dataset is provided in a readme file as part of the download. Data were last updated in early May, 2014.
-
This dataset contains ice motion observations made under the Australian Antarctic Program, Projects 4593 and 4506. Measurements of ice motion where made on (land)fast ice on the eastern rim of the Amery Ice Shelf, Antarctica (69.2 degr. S, 76.3 degr. E) and on landfast ice in Gronfjorden, Svalbard (78.0 degr. N, 14.2 degr. E). Data was obtained using Spotter wave buoys (Sofar Ocean Technologies), hereafter wave buoys, and open-source ice motion loggers, hereafter ice buoys. Instrumentation was deployed on top of the sea ice with the main motivation to measure its vertical motion due to ocean waves. The wave buoys 3-axis measure motion at 2.5 Hz through GPS and have an accuracy of approximately 2 cm for the significant wave height. The ice buoys measure motion in 9-degrees-of-freedom at 10Hz using a VectorNAV VN-100 IMU, accuracy is O(mm) for short waves and O(cm) for long waves. Both instruments also record their geographical location through GPS. Full time series of their motion is processed on board and summaries are send through Iridium. For the wave buoy, this occurred at an interval of 30 minutes. For the ice buoy this occurred every 3 hours. In the dataset, WB and IB are abbreviations for wave buoy and ice buoy, respectively. This dataset covers 2-8 January 2020 for the Antarctic campaign (WB1, WB2, IB1, IB2) and 14-28 March for the Arctic campaign (IB3, IB4, IB5) and includes significant wave height, peak period and the geographical coordinates of the instrumentation. ‘Hs’ refers to significant wave height (in meters). ‘Tp’ refers to peak period (in seconds). Time is in UTC, and in Matlab’s datenum format (i.e. the number of days since year 0000). The geographical coordinates ‘lat’ and ‘lon’ (latitude and longitude, respectively) are in degrees. Note, as the ice buoys transmit the GPS coordinates and wave data in separate data messages, for the ice buoys ‘time’ refers to the reference time of the wave properties Hs and Tp, whereas ‘time_latlon’ refers to the reference time of the geographical coordinates. For the wave buoy, all data is transmitted in one message.
-
The International Programme for Antarctic Buoys (IPAB) is run by the World Climate Research Programme (WCRP). IPAB is a self-sustaining project of the WCRP, and provides a link between institutions with Antarctic and Southern Ocean interests. IPAB was formally established, following a one year pilot phase, at a meeting in Helsinki, Finland in June 1994. IPAB aims to establish and maintain a network of drifting buoys in the Antarctic sea-ice zone, which monitor ice motion, pressure and temperature. In 1997, 16 organisations, representing 11 countries, were involved in the IPAB programme, including: Alfred Wegener Institute, Antarctic CRC, Australian Antarctic Division, British Antarctic Survey, Commonwealth Bureau of Meteorology, INPE -National Institute for Space Research, Institute for Marine Research and University of Helsinki, Hydrographic Department, Maritime Safety Agency, National Ice Center, National Institute of Polar Research, Programma Nazionale di Ricerche in Antardtide, Scott Polar Research Institute, Service Argos, South African Weather Bureau, United Kingdom Meteorological Office, and World Data Center A Glaciology. Tables of data availability, information, experiment details, literature, and data sets are available from the IPAB home page. Links are also available to databases held by other organisations, and links to Arctic and Indian Ocean buoy databases. The data are available via several provided URLs. Further information and the data can be obtained from the IPAB home page URL. The data and documentation are also available directly from the NSIDC website. Finally, an older copy of the data are also held locally on the Australian Antarctic Data Centre's servers. The documentation held at the NSIDC website provides important information on interpreting the dataset. A static copy of this document is included with the local copy of the dataset held on the Australian Antarctic Data Centre's servers. Data from January 1995 to July 1998 only has been made available on the NSIDC website (and correspondingly on the AADC's servers). The Australian subset contains data from drifting buoys that are along the ice edge or frozen into the ice. The data were observed around the Australian sector of Antarctica and recordings began in February 1985. Observations exist for around 20 buoys over this area and are not continuous over this area for this time period. Data from the period 1995-1998 only have been archived. This work was also completed as part of ASAC projects 732, 742 and 2678. The fields in this dataset are: Buoy Number Year Time Longitude Latitude ARGOS Positional Accuracy Sea Ice Flag Air Pressure Air Temperature Water Temperature Velocity
-
Ice Station POLarstern [ISPOL] was a multi-national, interdisciplinary study coordinated by the Alfred Wegener Institute for Polar and Marine Research, Germany, involving scientists from different institutes and nations across a range of scientific disciplines. ISPOL had been planned as a 50-day drift station in the Western Weddell Sea. Due to particularly heavy sea-ice conditions, the start of the drifting ice station was delayed, so that the drift interval, originating at -68 degrees 10'N, -54 degrees 46'W, lasted only a total of 35 days (28.11.2004 - 01.01.2005). Data and auxiliary information presented here are on the sea-ice drift and deformation experiment, which was a collaborative research program involving the International Arctic Research Center [IARC] at the University of Alaska Fairbanks, the Australian Antarctic Division [AAD], the Finnish Institute of Marine Research [FIMR] and the Alfred Wegener Institute [AWI]. Buoy contributions came from all four institutions listed above. - This metadata record covers only AAD buoy data from the ISPOL 2004 experiment. To estimate the characteristics of the sea-ice drift and dynamics in the Western Weddell Sea a meso-scale array of 26 drifting ice buoys was deployed for about 30 days during late November and December 2004. Sea-ice drift was obtained from the horizontal GPS-derived location measurements, which were made at all buoys but collected at various temporal resolutions and different spatial accuracies. Auxiliary instruments were attached to some of the sea-ice drifters, including temperature probes for air and sea-ice temperatures, and air pressure sensors. Four of the buoys were left in the ice pack after the end of the ISPOL field phase to record the large-scale drift in the region around the ice station from late summer into winter. See the metadata record 'Ice Station Polarstern. Aerial photographs over sea ice taken during the ISLOP project' for more information on the ISPOL project. Also, see the URL given below for the ISPOL home page.