Comparative study of processes controlling carbon export in Southern Ocean environments characterised by a different hydrodynamical and ecological functioning

Preliminary Metadata record for data expected from ASAC Project 1343

See the link below for public details on this project.

Comparative study of the processes controlling carbon export in Southern Ocean environments characterised by a different hydrodynamical and ecological functioning.

Work on this project was carried out on Voyage 3 of the Aurora Australis (CLIVAR) of the 2001 and 2002 season.

Work at sea target sampling sites were the 8 'particle stations' along the CLIVAR SR3 repeat transect: the SAZ at 47 degrees and 49 degrees S; the SAF at 51 degrees S; the PFZ at 54 degrees S; the IPFZ at 57 degrees S; the SPZ at 59 degrees and 61 degrees S; the SACCF at 63 degrees S and the SSIZ at 64 degrees S. Some of these (64 degrees, 61 degrees and 51 degrees S) were sampled again on the way back to assess temporal evolution. All proxy studies (new production; Ba; delta30Si; 234Th-deficit) were done at each particle station but not necessarily on the same CTD casts.

New production assessment Surface water (at 5, 25, 50 and 70m) was sampled with the CTD rosette at all particle stations. Different aliquots of 1L seawater were spiked with 15N-nitrate, 15N-ammonium or 15N-urea. All samples were spiked with 13C-bicarbonate; the latter in order to assess net primary production rates. Incubations (12 H) were done in a thermo stated algal cabinet, using appropriate neutral density screens for samples from depths below 5m. The samples were submitted to a constant light flux of 0.7x10power16 quanta/cm2/sec. Furthermore, samples from 5m depth were amended with increasing doses of ammonium (+0.1 micro M; +0.25 micro M; +0.5 micro M and +1 micro M) having natural 15N/14N abundance to assess susceptibility of N-uptake (ammonium, nitrate, urea) to ammonium. Similar experiments were run for three iron amended and control cultures in collaboration with Pete Sedwick, Dave Hutchins and Phil Boyd. Analysis of ammonium related to the incubation work was done on board by colorimetry. As a side product we obtained ammonium profiles at all particle stations and also six shallow CTD's in the southern part of the transect (greater than 61 degrees S).

Suspended particle sampling for trace element analysis and isotopic composition of Si For biogenic-Ba was also carried out. Typically 14 depths were sampled between the surface and 1000m. On board filtration was performed on Nuclepore membranes. These were dried (60 degrees C) and stored for analysis in the shore-based lab. Occasionally, we also sampled large particles - size fractions (greater than 70 micro m and 20 less than 70 micro m) - from the upper 150m for Ba, using the bow pump system of Tom Trull. Ba and Sr incubations on large settling particles sampled with the Snatcher were also performed at 5 particle stations. For delta30Si, all 24 depths of the deep CTD casts at the particle stations 1 to 8 were sampled. Filtered seawater and suspended matter filtered on Nuclepore membranes (dried at 60 degrees C) were saved for later analysis in the home based laboratory.

234Th work - we refer to the report by Ken Buesseler for the major part of this work. In addition we performed some work using the 'Snatcher' Large Volume sampler and sedimentation column. Total 234Th deficit and 234Th activity on particles and solution was assessed at T0 and T4 H after return of the sampling device on board, in an attempt to construct the 234Th mass balance and eventually get at the settling speed (and flux) of 234Th carrying particles. These analyses went together with flow cytometry analyses (collaboration with Clive Crossley) to check for sedimentation by (fluorescent) particles and also with POC and biogenic silica in order to determine the elemental ratios of suspended and sinking particles. Flow cytometer results did not indicate there was significant sedimentation of life cells going on at this time of the year.

Dissolved Ba Seawater samples were taken at all depths sampled by deep CTD's during the southward transect. Samples were acidified and kept for later analysis of dissolved barium by isotope dilution ICP-MS. Comparison of the dissolved Ba distribution along the transect with the one reconstructed through a multiple end-member mixing model will help understanding of the relative contribution of in-situ processes (uptake, dissolution) versus conservative mixing, thus improving our understanding of the oceanic Ba biogeochemistry.

Analysis

New production. Isotope ratio analysis of the 15N and 13C spiked natural plankton samples will be conducted in the home lab., using emission spectrometry and mass spectrometry. Mass balance calculations will allow assessing relative importance of new production as well as the fraction of new production that is in the particulate form and represents the potential for export.

Ba and trace elements. Suspended matter samples will be acid digested (HNO3, HCl, HF) and analysed per ICP-MS and ICP-AES for contents of Ba, Ca, Sr, Al, Fe, Mn, Th, U, REE, Ti. The vertical concentration profiles will inform on the latitudinal and temporal variability of the biogeochemical control processes between SAZ, PFZ, ACC and SSIZ subsystems. For the sites with sediment trap deployments, particulate trace element distributions in the water column will be compared with trace element composition of fast settling particles intercepted by the traps.

Ba-uptake / barite formation. Isotope ratio analysis (135Ba/138Ba; 86Sr/87Sr) of suspended matter incubated after spiking with 135Ba and 86Sr will be analysed by ICP-MS to investigate on the barite formation process. Abundance and type of barite crystals will be studied by SEM-EMP (mapping + photographs). delta30Si, In the home based lab. particle samples will be extracted using base (NaOH). Silicates in filtered seawater will be precipitated and analysed using a multi collector ICP-sectorial Mass Spectrometer (MC-ICP-MS) once this new method is set up.

234Th. Total, particulate and dissolved 234Th measurements were performed on board using low beta counters. Background (after 6 months decay) and chemical yields will be measured at Ken Buesseler's lab (WHOI, USA), using beta counters and ICP-MS respectively.

The worksheets contained in the excel spreadsheet are:

Phyo biomass

New production and cell counts

Particulate barium

Dissolved barium

d29Si isotope signature of dissolved silicic acid

The fields in this dataset are:

Carbon

Seawater

CLIVAR

temperature

pressure

salinity

depth

barium

latitude

longitude

oxygen

silicate

phophate

nitrate

flagellates

diatoms

picoplankton

plankton

urea

ammonia

coccolithophores

Identification info

Alternate title: Comparative study of processes controlling carbon export in Southern Ocean environments characterised by a different hydrodynamical and ecological functioning

Date (Publication): 2004-09-29

Edition: 1

Citation identifier

Dataset DOI

Title: Information and documentation - Digital object identifier system

Date (Publication): 2012-04-23

Citation identifier: ISO 26324:2012

Citation identifier: doi:10.4225/15/55E9137BE4573

Originator

Dehairs, F.

Publisher

Australian Antarctic Data Centre

Principal investigator

DEHAIRS, FRANK

Vrije Universiteit Brussel, Pleinlaan 2

B-1050 Brussels

Belgium

+32 2 629 1265

+32 2 629 1811 (facsimile)

Collaborator

DEHAIRS, FRANK

Vrije Universiteit Brussel, Pleinlaan 2

B-1050 Brussels

Belgium

+32 2 629 1265

+32 2 629 1811 (facsimile)

Name: CAASM Metadata

Website: https://data.aad.gov.au/metadata/records/ASAC_1343

Status: Completed

Custodian

AU/AADC > Australian Antarctic Data Centre, Australia - AADC, DATA OFFICER (DATA CENTER CONTACT)

Australian Antarctic Division

203 Channel Highway

Kingston

Tasmania

7050

Australia

+61 3 6232 3244

+61 3 6232 3351 (facsimile)

Topic category

Biota
Geoscientific information
Oceans

Extent

Description: Temporal Coverage

Temporal extent

TimePeriod: 2001-11-03 2001-12-04

Extent

Description: Vertical Extent - Depth

Vertical element

Minimum value: 5

Maximum value: 4456

Identifier: urn:x-ogc:def:cs:EPSG:6498

Name: Vertical CS. Axis: depth (D). Orientation: down. UoM: m.

Identifier: urn:x-ogc:def:axis:EPSG:113

Name: depth

Extent

Description: Vertical Extent - Depth

Vertical element

Minimum value: 5

Maximum value: 2001

Identifier: urn:x-ogc:def:cs:EPSG:6498

Name: Vertical CS. Axis: depth (D). Orientation: down. UoM: m.

Identifier: urn:x-ogc:def:axis:EPSG:113

Name: depth

Extent

Description: Vertical Extent - Depth

Vertical element

Minimum value: 4

Maximum value: 4166

Identifier: urn:x-ogc:def:cs:EPSG:6498

Name: Vertical CS. Axis: depth (D). Orientation: down. UoM: m.

Identifier: urn:x-ogc:def:axis:EPSG:113

Name: depth

Extent

Description: Vertical Extent - Depth

Vertical element

Minimum value: 5

Maximum value: 3862

Identifier: urn:x-ogc:def:cs:EPSG:6498

Name: Vertical CS. Axis: depth (D). Orientation: down. UoM: m.

Identifier: urn:x-ogc:def:axis:EPSG:113

Name: depth

Extent

Description: Vertical Extent - Depth

Vertical element

Minimum value: 5

Maximum value: 3098

Identifier: urn:x-ogc:def:cs:EPSG:6498

Name: Vertical CS. Axis: depth (D). Orientation: down. UoM: m.

Identifier: urn:x-ogc:def:axis:EPSG:113

Name: depth

Extent

Description: Vertical Extent - Depth

Vertical element

Minimum value: 5

Maximum value: 4203

Identifier: urn:x-ogc:def:cs:EPSG:6498

Name: Vertical CS. Axis: depth (D). Orientation: down. UoM: m.

Identifier: urn:x-ogc:def:axis:EPSG:113

Name: depth

Extent

Description: Vertical Extent - Depth

Vertical element

Minimum value: 5

Maximum value: 4456

Identifier: urn:x-ogc:def:cs:EPSG:6498

Name: Vertical CS. Axis: depth (D). Orientation: down. UoM: m.

Identifier: urn:x-ogc:def:axis:EPSG:113

Name: depth

Extent

Description: Vertical Extent - Depth

Vertical element

Minimum value: 6

Maximum value: 3749

Identifier: urn:x-ogc:def:cs:EPSG:6498

Name: Vertical CS. Axis: depth (D). Orientation: down. UoM: m.

Identifier: urn:x-ogc:def:axis:EPSG:113

Name: depth

Extent

Description: Vertical Extent - Depth

Vertical element

Minimum value: 6

Maximum value: 2250

Identifier: urn:x-ogc:def:cs:EPSG:6498

Name: Vertical CS. Axis: depth (D). Orientation: down. UoM: m.

Identifier: urn:x-ogc:def:axis:EPSG:113

Name: depth